Tất cả danh mục
Actuator AG01 Analog
Actuator AG01 Analog
Tình trạng: Còn hàng
Liên hệ
Đặt mua qua hotline (8:00 - 20:30)
0938.388.583
Chia sẻ:

Mô tả sản phẩm

CHI TIẾT SẢN PHẨM

Analog actuators

Overview of our analog servo drives

   Easy to implement actuators for absolute positioning with analog output.

Functioning and design of analog actuators

AG01 and AG02 positioning drives in detail

   With the DriveLine AG01 and AG02 analog actuator / spindle drive, potentiometer sensors are used as sensors for recording angle change or rotation direction and in conjunction with mechanical units such as spindles, synchronous belts or gear racks for recording linear movements.

   The potentiometer-encoder is a position sensor of the potentiometer type. Based on the position of the movable part (slider), the electrical resistance between the slider and the ends changes. By switching the encoder as a voltage divider, it is thus possible to obtain an electrical voltage that changes relative to the position. Using transmitters (analog), also referred to as measuring transducers in some areas, the resistance values can be provided or emitted in a standardized, analog electrical standard signal, for example electrical signals in accordance with DIN IEC 60381-1: 0 to 20 mA or 4 to 20 mA (live zero) or voltage signals in accordance with DIN IEC 60381-2: 0 to 10 V or 2 to 10 V (live zero). Live-zero signals are used in almost all industrial applications. If the beginning of the measurement area is allocated an electrical signal that differs from 0, it is possible to monitor breaks in the wire. The process of recording measurement values is adjusted to the entire measurement range using an internal measuring gear as well as a trimmer potentiometer in the case of transformers.

   Unlike a digital signal, an analog signal is stepless and can be as fine as needed. In the case of real physical parameters, however, the resolution is limited by disruptions such as noise or distortion. Once disruptions are added to an analog signal, they can no longer be reversed.

   Modern rotary potentiometers are manufactured with tracks made from conductive plastic. Not only does this solution ensure a considerably longer service life than a wire potentiometer, the high-quality mixtures also make it possible to use the products even in moist conditions or at high temperatures.

Analog actuators with integrated absolute measurement technology

   By using absolute encoders with an analog output signal, these do not have to be referenced after switching on (unlike incremental encoder systems), as changes in position are recorded when the device is switched off and are available immediately after switching on the device.

   Up to 1,280 revolutions of the motor gear drive shaft with an analog signal of 10kOhm or 0 - 10V as well as 4 - 20mA are standard for the AG01 and AG02 range. The large measurement area achieved as a result means that even long linear distances can be positioned absolutely and very precisely.

Areas of application of analog actuators

   In an industrial environment, DriveLine drives / actuators with an analog output are often used for automated format adjustment, stops, tools and valves or fittings as well as for many other comparable positioning tasks, in general and special machine construction, in assembly technology, handling technology, robot technology and on or in trade fair equipment and testing equipment as well as in process automation.

Benefits

   + Flexible machine conception, simple regulating behavior

   + Low installation and mounting effort

   + High availability and freedom from maintenance

   + Short cycle or changeover time

   + High productivity and quality

   Những lợi ích khi bạn mua hàng tại Công ty AMECH:

     - Sản phẩm có nguồn gốc xuất xứ rõ ràng nên bạn dễ dàng thay thế, nâng cấp linh kiện khi cần thiết;

     - Sản phẩm trước khi xuất xưởng luôn được kiểm tra nghiêm ngặt;

     - Sản phẩm được bảo hành 12 tháng nên bạn có thể yên tâm khi sử dụng;

    - Trang web bán hàng của Công ty AMECH đã đăng ký và được kiểm tra bởi Bộ Công Thương (link đến thông tin của AMECH tại trang web của Bộ Công Thương ở phía cuối trang web) nên bạn có thể yên tâm khi mua hàng.

THÔNG SỐ KĨ THUẬT CHÍNH


Model: AG01


Analog

High-performance compact actuator for absolute positioning jobs

Profile AG01:

+ Easy mounting

+ Through hollow shafts up to max. ø14 mm possible

+ Integrated analog absolute position encoder

+ Electrical connection via cable or connector


Xuất xứ: GERMANY.


Miễn phí tư vấn, vận chuyển trong nội thành Hà Nội (xem thêm chính sách giao hàng của Amech)!

Liên hệ với chúng tôi công ty Amech để có thêm thông  tin về kích thước và các loại cảm biến khác khác!

Giá và thông số kỹ thuật sản phẩm có thể thay đổi tùy theo model từng thời điểm mà không báo trước (do công ty chưa cập nhật kịp trang web). Cần liên hệ với công ty để có thông tin chính xác và giá cụ thể!


Quý khách vui lòng gửi mail để đặt hàng!

;